• Torque: 2050 Nm max at 100 bar.
• Push force: 122 000 N max at 100 bar.
• Pull force: 72 000 N max at 100 bar.
• Angle of rotation: 90, 180°, 270° or 360° (others on request).
• Stroke: 1200 mm max (others on request).
• Optimized end cushioning (option).
• Through precise combined helical gears and low friction seals, is the HSE4 already from 10 bar economically applicable.
• Maximum operating pressure: 100 bar

Adjustable drive shaft datum

• If you manufacture the hub, it is not necessary to regards the exact position of the keyways.
• The total angle can be re-adjusted at any time.

Highly perfected end cushioning for absorption of kinetic energy

• Negating the needs for expansive proportional or servo controls with virtually identical characteristics.

Flexible mounting possibilities

• Flange or foot mounting already in the standard range.
• Mounting possibilities in accordance with the request of the customer.

Large-area press-fit joint

• Assuring positive power/torque transmission even at peak load conditions.

Externally adjustable end stop (standard)

• The end angle can be re-adjusted at any time by +/- 5°.
• In conjunction with the adjustable drive shaft datum, it is therefore possible to adjust the initial and final position of the total angle required.

Wear-resistant moving parts

• Long service life of the rotary actuator through extende-period nitriding.Excellent sliding characteristics of the gears.

Modern sealing technology

• Extended service life of seals.
• Increased safety, also with regards to the environment.
• Suitable for most fluids.
• All installation places have the smallest possible tolerances, in case of that, do we avoid a gap extrusion of the seals.
• No internal leakages through solid seals enabling the load to be held in any intermediate position.